Product Note:
Description
Kota Pro Heat Activated Adhesive for fabric or patches to apply to garments. Cut to size and adhere to patch or other materials. Then apply patch or other materials to garments.
Kota Pro Heat-Activated Adhesive Instructions:
Press at 200 degrees for 10-13 seconds with medium pressure ensuring the
adhesive is evenly pressed.
100% heat-activated it remains non-sticky to the touch until activated.
Apply first to one substrate then to the final application.
For general application place the substrate face down in the heat press and
cut the adhesive to the size of coverage needed or what your heat bed allows
for even pressure. It's best to precut to the size of the substrate with as
little going over the edge as possible.
Be sure the white carrier sheet is face up and the shiny adhesive side is face
down on the substrate.
Allow it to completely cool. We recommend placing some weight on it while
cooling to avoid possible bowing.
If the adhesive is rolling up on itself use a small amount of heat tape to
hold it down.
You may also like